CLEANING THE DOOR SEAL/BELLOW
1. Open the washer door and remove any clothing or items from the washer.
2. Check if there are any foreign substances on the grey seal/
bellows between the lid and the drum.
To check this, turn the seal/bellows out.
3. If there are any foreign substances, remove them.
4. If you fi nd stained areas, wipe them down using the procedure below:
a) Carefully combine ¾ cup (177 mL) of liquid chlorine bleach with 1 gal. (3.8 L) of warm
b) Wipe the seal/bellow area with the dilute solution using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down the area thoroughly with a dry cloth and let the washer interior air dry with
IMPORTANT:
•
Wear rubber gloves when cleaning for prolonged periods.
•
Refer to the bleach manufacturer's instructions for proper use.
PRESERVING THE TOP COVER AND THE FRONT FRAME
Do not place any heavy or sharp objects or a detergent box on the washing machine. They can scratch or
damage its top cover. Keep them in the pedestal (if purchased) or in a separate storage box.
Since the entire washing machine has a high-gloss fi nish, the surface can be scratched or damaged.
Avoid scratching or damaging the surface when using the washing machine.
WF395BTPA-03145B-02_EN_20120829.indd 31
WF395BTPA-03145B-02_EN_20120829.indd 31
tap water.
the door open.
seal/bellow
maintaining your washer _31
2012-08-31
2012-08-31
12:36:24
12:36:24