Wifi Use - Mustang Fender GT40 Manual Instrucciones De Uso

"DELETE" will then appear in a blue box; press the ENCODER on it to delete that preset. Alternately, press the PRE-
SET LAYER button corresponding to "back" in the DISPLAY WINDOW to not delete the preset from the Setlist:
To create subsequent additional Setlists, repeat the steps on pages 26 and 27. These will automatically be
labeled "SETLIST 2, " "SETLIST 3" and so on in numerical order.
Mustang GT's WiFi connectivity delivers easy wireless network access, enabling users to get the latest Mus-
tang GT firmware updates (see page 49). To get started, press the MENU utility button and use the ENCODER
to scroll to "WIFI, " then press the ENCODER to access WiFi settings.
The default WiFi setting is "off, " indicated by a red box labeled "WIFI OFF. " Press the ENCODER again to turn WiFi
on, indicated by a green box labeled "WIFI ON. " When WiFi is on, use the ENCODER to scroll through available
networks; select a network by pressing the ENCODER on it. If a known network is not displayed, it can be
entered manually by selecting the "ADD HIDDEN NETWORK" option at the end of the list of available networks
and using the ENCODER to enter the characters (as shown on page 6). Once a network is chosen, select "CON-
NECT" from the menu shown by pressing the ENCODER on it (other options in this menu are covered on page 30).
After choosing "CONNECT, " the amp will then prompt the entry of a password. To spell out a password, press the
ENCODER once to activate the cursor and turn it to choose a character. Press ENCODER again to enter that char-
acter and move to the next; repeat until password is complete. When password is complete, press the top LAYER
button (corresponding with onscreen prompt "done"). Successful network connection is indicated by a green
dot to the left of the network name. All steps are illustrated below and on the following page.
Note that pressing the PRESET LAYER and CONTROLS LAYER buttons also enable closing out of some menus
(indicated by an "x") or returning to the previous step (indicated by the label "back").
back
DELETE

WIFI USE

AMP SETTINGS
ABOUT THIS AMP
WIFI
BLUETOOTH
SETLIST
To enable WiFi, first press the MENU utility button.
28
MENU
MENU