Alternately, when finished playing the first musical passage, step on FUNCTION button 1 (yellow arrow in
illustration below) again to go straight into overdub mode; the red FUNCTION LED above FUNCTION but-
ton 1 will continue flashing and the DISPLAY WINDOW will show "DUB, " indicating that the LOOPER is now
in overdub mode and a second musical passage can be recorded over the first. Overdub mode can also be
activated during playback of the first passage or after stopping playback by stepping on FUNCTION button
1 again. Continue overdubbing musical passages as often as desired. After an overdub is recorded, step on
FUNCTION button 2 (green arrow in illustration below) to start and stop playback of all recorded parts (see
illustration below).
QA
MODE
PRESETS
EFFECTS
LOOPER
While recording, playing back or stopped on the first musical passage, the user can undo the recording if
desired by stepping on FUNCTION button 3 (yellow arrow in illustration below), labeled "UNDO. " When doing
so, recording will stop and the DISPLAY WINDOW will show three dashes, indicating that whatever had been
recorded is now erased. Once overdubs have been added, however, the UNDO function applies only to the
last overdub recorded; preceding overdubs cannot be undone (see illustration below).
QA
MODE
PRESETS
EFFECTS
BANK DOWN
1
FX 1
REC/DUB
BANK DOWN
1
FX 1
LOOPER
REC/DUB
BANK UP
2
FX 2
MGT-4
PLAY/STOP
BANK UP
2
FX 2
MGT-4
PLAY/STOP
39
ASSY. P/N 7710238000
HOLD
TUNER
3
FX 3
UNDO
ASSY. P/N 7710238000
HOLD
TUNER
3
FX 3
UNDO