Storing The Power Cable - B.Braun Aesculap VetCare Instrucciones De Manejo

Insert the mains adapter 8 in a
power socket.
Place the charging unit 2 on a
flat surface.
Place the appliance in the charging unit. It positions
itself and starts charging. The red charging
indicator 1 is always on when the appliance is charg-
ing. Make sure the On/Off switch 4 is in the 0 position
when charging.
To maintain the charging capacity of the battery we
recommend occasionally draining the battery until
the motor stops.

3.2 Storing the power cable

If you do not need the full length of
the cord, part of it can be stored in
the cable storage compartment 9.
Pull out the mains plug.
Turn the charging unit upside
down.
Wind the excess cable round the
holder in the base, then run the
cable through the small recess in
the housing to the outside.
13