Saving The Counts And Program Parameters; Pc Communication - Marienfeld Cellcounter Manual De Instrucciones

09/2020
The results can be read on the color display. In contrary to the counting process, the
absolute and relative counts are highlighted. When pressing the counting keys now,
counting is no longer triggered. The display of the counts is switched according to the
respective key pressed.
The evaluation can be terminated by pressing the key „Enter/Go On":
• If the countstop has not yet been reached while counting, the screen changes
back to the counting process.
• If the countstop has already been reached, it is incremented by 100 (unless it did
not already reach the value 1000). The display now changes to the counting
mode.
• If the countstop had already reached the value of 1000, the key „Enter/Go On"
is ignored. The menu can now only be exited when resetting the device by
holding the "Corr./Clear" key.

8. Saving the counts and program parameters

When switched off correctly (holding the standby button), the device saves the last
program set and the last created counting data.
If an incomplete count has been saved, the device starts directly in the counting mode
with the counting data of the incomplete count when the device is switched on again
(by pressing the standby key). You can continue counting now. When the saved count
has been completed, it can be called up in level 1 by pressing any counting key.

8.1 PC communication

The device transfers the generated counting data to the Cellcounter PC-Manager
(software available for download from our website). To do this, the device must be
connected to a computer using a suitable USB cable. In addition, when a key is
pressed, the associated key code is sent. The codes and associated keys are shown in
the table below.
Name Standby
Code 1
Designation Counting key 1
Key 66
Designation Counting key 2
Key 68
Designation Counting key 3
Key 70
Paul Marienfeld GmbH & Co. KG
Am Wöllerspfad 4
97922 Lauda-Königshofen, Germany
Tax number: 8028008501
VAT reg. no.: DE 811 479 105
Left/-/Eval
3
Counting key 4
72
Counting key 5
74
Counting key 6
76
Phone: +49 (0) 9343 6272-0 Deutsche Bank Würzburg
Fax: +49 (0) 9343 6272-25 IBAN: DE95 7907 0016 0130 0888 00
info@marienfeld-superior.com SWIFT: DEUT DE MM 790
www.marienfeld-superior.com
Right/+ Enter/Go On
4 5
Counting key 7 Counting key 10
78 84
Counting key 8 Counting key 11
80 86
Counting key 9 Counting key 12
82 88
Commercial Register Mannheim HRA 550306, personally liable
partner: Marienfeld-Verwaltungs-GmbH, 97922 Lauda-Königshofen
Commercial Register Mannheim HRB 560548, Managing Directors:
Gerd Marienfeld, Harry Marienfeld
21
Corr./Clear
6
Counting key 13
90
Counting key 14
92
Counting key 15
94