• authorized technician. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• This appliance is intended to make espresso and cappuccino.
• Only use the appliance in a dry, indoor area. It is intended for do-
mestic use and similar areas of use such as e.g.
- In staff kitchens in shops, offices and other commercial areas.
It is not intended for use in farm accommodation or Bed & Break-
fast establishments or by guests in hotels, motels and other accom-
modation facilities.
CAUTION:
The appliance must not be immersed in water for cleaning. Refer to
the instructions provided in the chapter "Cleaning".
Supplied Parts
1 Espresso machine
1 Removable water tank
1 Steam nozzle cover
1 Filter holder
1 1-cup filter insert
1 2-cup filter insert
1 Drip tray grid
1 Drip tray
1 Measuring spoon / tamper
Unpacking the Appliance
1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic film, filler
material, cable ties and box packaging.
3. Check that all the parts are in the box.
NOTE:
There may still be dust or production residues on the
appliance. We recommend that you clean the appliance as
described under "Cleaning".
Description of the Components
Figure A
1 Water tank lid
2 Removable water tank
3 Steam control knob
54
ES1185CB_IM
4 Steam nozzle with cover
5 Drip tray compartment
6 Drip tray grid
7 Drip tray
8
Power switch
9
Switch (Pump)
10
Switch (Steam)
11 Heater indicator lamp "ok"
12 Status indicator lamp "I"
13 Warming plate / cup tray
14 Filter insert for 1 cup
15 Filter insert for 2 cups
16 Filter holder
17 Filter safeguard
18 Measuring spoon / tamper (1 part, 2 functions)
Notes on Use
Placement
• Place the appliance on a stable and level surface.
• Due to rising heat and vapours do not operate the appli-
ance under wall cabinets.
• Do not place the appliance in close proximity to a gas or
electric stove or any other heat source.
Switches (8 / 9 / 10) and Steam Volume Control (3)
The controls have the following functions:
Switches 8 / 9 / 10 position „" = Off
04.03.16