Measuring Blood Pressure - Beurer BM 40 Manual De Instrucciones

User memory Date
➔
It is essential to set the date and time. Otherwise, you will not
be able to save your measured values correctly with a date and
time to retrieve them later.
The time is displayed in the 24-hour format.
If you press and hold the function buttons -/+, you can set
the values more quickly.
• Press the SET button.
The user memory symbol flashes on the display.
• Select the desired user memory by pressing the
function buttons -/+.
You have two memories, each with 60 memory spaces,
to store the measurements of two different people
separately.
• Confirm using the SET button.
The year flashes on the display.
• Set the year with the function buttons -/+ and con-
firm with the SET button.
• Set the month, day, hour and minute and confirm
each setting with the SET button.
When making settings, you can use the START/STOP
button at any time to switch the device off. The set-
tings that have already been performed will be retained.
Time
➔
Operation with the mains part
You can also operate this device with a mains part. When do-
ing so, there must not be any batteries in the battery compart-
ment. The mains part can be obtained from specialist retailers
or from the service address using order number 071.19.
• To prevent possible damage to the device, the blood pres-
sure monitor must only be used with the mains part de-
scribed here.
• Insert the mains part into the connection provided for this
purpose on the right-hand side of the blood pressure moni-
tor. The mains part must only be connected to the mains
voltage that is specified on the type plate.
• Then insert the mains plug of the mains part into the mains
socket.
• After using the blood pressure monitor, unplug the mains
part from the mains socket first and then disconnect it from
the blood pressure monitor. As soon as you unplug the
mains part, the blood pressure monitor loses the date and
time setting but the saved measured values are retained.

5. Measuring blood pressure

Please ensure the device is at room temperature before meas-
uring.
Positioning cuff
Fit the cuff round your bare left upper
arm. Blood circulation in the arm
should not be restricted by tight cloth-
ing or other objects.
20