Before Starting - IKRA GBS 9054 LI Instrucciones De Manejo

shoes and working gloves. Do not wear broad
clothes which could be caught by the moving
parts.
• After you finish using the clippers and before
cleaning them, it is necessary to ensure that the
machine cannot be accidentally turned on, such
as by unlocking the switch.
• Check the cutting unit regularly for damage
• Never hold the clippers by the blades, you may
run the risk of injury even when the clippers are
not moving!
• Never touch moving blades in an attempt to re-
move debris or if the blades are blocked. Always
switch off the device.
• Keep the machine away from children and store
it in a safe place.
• When working with the shears, always take a sta-
bile standing position, particularly when you are
using steps or a ladder.
• Do not use shears with a damaged or excessively
worn-out cutting part
• Ensure that all protective devices and handles
are installed on the machine. Never try to put an
incomplete machine in operation.
• Always use the protective part designed for the
blade when transporting and storing the shears.
• Before starting the work, make yourself famil-
iar with the surroundings and possible dangers
which you may not hear because of the noise.
• Only use the spare sparts and accessories recom-
mended by the manufacturer.

Before starting

Safety key
2
Due to the latest safety regulations - for service works
with an open device - this machine is equipped with a
safety key,(X) (Fig. 2). This must always remain inserted
during normal use. Without this safety key the machine
cannot be put into operation. It is only removed when a
service technician opens the device, in order to prevent
the machine from being switched on inadvertently and a
risk of injury arising.
GB | Operating Instruction
Charging the battery
Safety Instructions:
The tool is delivered with the lithium-ion battery charged.
However, we recommend recharging the battery before
the tool is operated for the first time.
- Use the included charging unit for charging the bat-
- Never use other charging unit. This will result in fire
- Always keep the charging unit clear of rain or mois-
- Never try to charge third-party batteries with this
- Check the housing, plug and cable for damage before
- Do not open the charging unit by force. In case of a
- The charging unit heats up during the charging pro-
- Never open the battery cells. Hazard of short circuits!
- In case of damage to the battery, hazardous vapours
- Protect the battery from heat, intense insolation and
Charging process:
To charge the battery connect the charging unit to an
electrical socket. Then connect the plug of the charg-
X
ing cable to the charging socket of the grass and shrub
shears or trimmer (fig. 3)
3
X
6
tery only. It is specially designed to match the tool's
battery.
and/or explosion hazard!
ture. Hazard of electric shock! - Never charge the
battery in the open without protection, always choose
a dry, protected place.
charging unit. This will result in fire and/or explosion
hazard!
each use of the charging unit. Do not use the unit if
you detect damage.
defect, the charging unit must be replaced.
cess. Do not place the unit on a flammable surface or
operate it in a flammable environment. Fire hazard!
or fluids may escape. In case of incidental contact
flush with water and seek medical advice immedi-
ately. The fluid may have irritating or caustic effects
on the skin.
fire. Explosion hazard!
X