Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FR
1. SAFETY REQUIREMENTS
ES
•
This appliance can be used by children aged from 8 years and above and
PT
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
IT
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
EL
maintenance shall not be made by children without supervision.
•
Children of less than 3 years should be kept away unless continuously
PL
supervised.
•
Children aged from 3 years and less than 8 years shall only switch on/o the
RU
appliance provided that it has been placed or installed in its intended normal
operating position and they have been given supervision or instruction
UA
concerning use of the appliance in a safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
RO
CAUTION - Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children and
EN
vulnerable people are present.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly quali ed persons in order to avoid a hazard.
•
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and o by the utility.
•
WARNING: In order to avoid overheating, do not cover the heater.
•
The heater must not be located immediately below a socket-outlet.
•
WARNING: In order to avoid a hazard for very young children, this appliance
should be installed so that the lowest heated rail is at least 600 mm above the
oor.
•
Appliance is to be supplied through a residual current device (RCD) having a
rated residual operating current not exceeding 30 mA.
•
Means for disconnection having a contact separation in all poles must be
incorporated in the xed wiring in accordance with the wiring rules.
•
Connect the two conductors of the supply cable to a connection box in
respecting the polarities as below:
-Live:Brown
49
- Neutral: Blue
•
Warning: this product shall be installed in the volumes 2 only according
the national wiring rules (For France NF C 15-100).
Note: We suggest that you to contact a professional electrician for assistance.
2. INSTRUCTION FOR USE
When the product is plugged and push the ON/OFF (0/I) button located at the back of the
appliance,the buzzer "beeps" and the screen ashes for 3s, then in the standby mode. Push
again, if you want to switch o .
In standby mode,you can set the day and time.
SET THE CURREN DAY
Press SET, the day icon （1 2 3 4 5 6 7） ashes. Use + and - to set current day. Then press OK,
it will save and enter into next step automatically for hour setting.
SET THE CURREN HOUR
The hour icon 01:00 ashes. Use + and - to set hour. Then press OK, the minute icon
00:01 ashes. Use + and - to set minutes. In the end, press OK to con rm and save automatically.
Manual mode:
Press
, start at 2000W (show
on screen), you can do the following:
1) SET TEMPERATURE
Press SET, setting temperature ashes 20 (default temperature setting is 20°C), use + and - to
set and press OK to con rm(selected temperature range 5°C - 40°C).
2) CHANGE POWER
In Manual mode, press
to set the power in following order: 2000W(
-Fan (
). Press again, the power changing will repeat the cycle.
Window mode(ONLY work during manual program):
Press
to turn on open-window detection:
During open-window detection mode,once the ambient temperature drops 5-10℃ within 10
minutes, then the product will stop working within 30 minutes and enter into stand by mode.
Press the
button again to turn o open-window detection.
WEEKLY PROGRAM SETTING (PROGRAM MODE)
Weekly program explain:
1. It can set day by day from Monday to Sunday. And for each day, it can set 2 working periods
(P1/ P2).
2. The product works at full power (2000W) during weekly program.
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
)-1000W(
)
50
Publicidad
Tabla de contenido
