EQUATION BH-1701T Instrucciones De Montaje, Utilización Y Mantenimiento página 27

WEEKLY PROGRAM SETTING:
FR
In STANDY MODE: Press for 3 seconds, it enters into WEEKLY PROGRAM setting,the icon
lashes on the screen until complete the whole setting. And the day icon (1 2 3 4 5 6 7) ashes,
ES
use + and - to select the day, P1 shows in screen (The wake up time for the initial setting, the
time shows "OFF". Press , the time become
PT
into next step - wake up time setting: the hour ash (use + and - to set(23-hours). Then press
OK, it enters into next step - minutes setting: the minute icon
IT
set minute(0-58 minutes). Then press OK, it enters into next step - temperature setting: setting
temperature ashes 20 (default temperature setting is 20°C), use + and - to set(selected
EL
temperature range 5°C - 40°C). Press OK, it enters into next step - OFF time setting:
the hour ash use + and - to set(23-hours). Then press OK, it enters into next step - minutes
PL
setting: to minute setting, the minute icon
minutes). Press OK to con rm and it automatically enter to next working period. In this cycle,
RU you can set 7 days on/o timer.
The will be displayed on the working status. If you want to turn o the weekly program,
press to turn o ,and the
UA
Remark:
RO
1. During the process of WEEKLY program setting, if you want to quick nish the setting, press
for 3 seconds to con rm and exit.
EN
2. After complete all settings(14 working periods=7daysx2periods/day), if you want to
remove 1 period: go to this period, then press
3. For the current day: Before P1 starts, P1 working period will on the screen; If P1 pass, P2
working period will on the screen; If P2 pass, the timer symbol will show on the screen.
3. CLEANING
To ensure your appliance gives you lasting service, you should clean it regularly.
Warning! To avoid the danger of anelectric shock or burning:
- always be sure that the appliance is switched OFF before cleaning or
attempting to store the item;
- allow the appliance to cool down;
- never immerse the appliance in water;
- never allow water or cleaning agent to run into the appliance.
1. Clear the external surface of the product by wiping it with a soft, damp cloth.
Caution! Never use caustic or abrasive cleaning agents,as this could damage
your appliance.
2. Always ensure the product's housing is intact and completely assembled
before use.
51
and can start to set). Press OK, it enters
ashes. Use + and – to
ashes. Use + and – to set minute (0-59
screen will disappear.
, the time will change to "OFF".
4. RECYCLING
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
BH-1701T
230-240 V~ 50 Hz
2000 W
IP24
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
52