Flash Time - Amplicomms PowerTel 97 Alarm Manual De Instrucciones

P
HONE SETTINGS
• Press .
• Using /
firmed with a short beep (on) or not (OFF). Press

Flash time

FLASH
• Press .
• Using /
100 ms (default setting) is the right setting for most connections; You do not
have to change anything. Press
Flash time - To use the features on an analog network, a flash time of 100 ms
is correct. However, when operating a telecommunications sys-
tem, it may be necessary to set a flash time of 300 or 600 ms. You
can find more information in the system's operating instructions.
140
, select whether every press of a button should be con-
is shown in the display (settings menu, see p. 127).
, select the right flash time for your connection.
Helpline UK 0844 800 6503
(See page 148 for costs and hours of operation)
.
.