Turn Call Led On/Off; Setting The Dialing Method - Amplicomms PowerTel 97 Alarm Manual De Instrucciones

Turn call LED on/off

CALL LED
• Press .
• Using /
not (OFF) when a call comes in and when there are new entries in the call
list and press

Setting the dialing method

TONE/PULSE
• Press .
• Using /
(TONE = tone dialing / PULSE = pulse dialing). Press
Note: For most connections, tone dialing is the correct setting.
is shown in the display (settings menu, see p. 127).
, select whether the call display should blink (ON) or
.
is shown in the display (settings menu, see p. 127).
, set the necessary dialing method for your connection
Helpline UK 0844 800 6503
(See page 148 for costs and hours of operation)
P
HONE SETTINGS
.
141