Special Features; Switching Off The Unit - Medisana TDB Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 63
GB
4 Operating
4.5

Special features

4.6
Switching off
the unit
24
• The belt may be worn comfortably under clothing when the settings for
the treatment program and time have been selected and the keypad
cover
has been closed again. Take care in this case that the pushbut-
ton connectors,
and
not damaged.
• For ease of use, the TENS unit may be worn on the belt by attaching it
using the clip on its rear.
• If an application is to be repeated, first turn the two intensity controllers,
and
, to the OFF position and then back to the desired intensity
level. The program is repeated with the settings selected previously.
• Try out different programs to find out which of the preset program
sequences is most suitable.
• Different people experience different levels of effectiveness with a treat-
ment program. It may be that the feeling of efficacy of a program will
decrease if it has already been used for several hours at different times.
This may happen because the body has become used to the pulse inten-
sity or the program sequence set. This may be avoided by changing the
intensity and the program from time to time.
WARNING
Only use the belt when all four pads are attached to the
electrodes to prevent unpleasant electric shocks. Check the
condition of the electrode pads and cables regularly.
• The unit switches off automatically on expiry of the preset treatment time
of 15, 30 or 60 minutes. The unit can also be switched off manually at
any time. In both cases the intensity controllers,
ned anti-clockwise until they click into the OFF position and the display
goes blank.
WARNING
To prevent unpleasant electric shocks, never remove the
treatment belt
switched on. First turn the two intensity controllers,
and
, anti-clockwise until they click into the OFF position
and the display goes blank.
• Leave the pads on the electrodes on the belt. For safe storage, place the
plastic films marked with "on" back on the electrode pads after each use.
This will increase the service life of both electrodes and pads.
, do not get pulled off and that the cables are
from the skin whilst the unit is still
and
, must be tur-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

86852

Tabla de contenido