Assemble Dryer For Installation - Haier HLP141E Manual Del Usuario

English

Assemble Dryer for Installation

Screw mounting hook bracket and wall spacer to dryer with screws provided.
1. Attach Hanging hook bracket
using the 4 screws.
3. Remove the screw on the left side of the exhasut pipe.
4. Attach the Exhaust Vent Housing to the Exhaust Pipe. Postion the Exhaust Vent
Housing in one of two ways. Secure the housing in place with the screw that was
removed in step 3.
7
2. Attach the wall spacers to the bottom of
the dryer. Remove 2 screws and 2 flat washers.
Exhaust Pipe
Exhaust Vent Housing
Remove this screw to attach
Exhasut Vent Housing.
Remove and discard the
flat washers from the
screws.
Positon the wall
spacers and secure
them with the screws
that were removed.
Spacers