Publicidad
FINAL ASSEMBLY
3. Insert clear snap-in Shelf Clips into the holes on the sides of the cabinet.
4. Push one side of the shelf into the left or right clip. Snap the shelf down into the opposite side. If the shelf is too tight, repeat the
process starting from the opposite side.
5. Press the shelf hole plugs into the unused holes inside the cabinet. Place the screw head caps over any exposed screw heads.
3
[SS131]
(12)
[SS131]
NOTE: Do not store items in the cabinet area directly behind the hinge, as damage may occur to cabinet or items.
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
4
15
5
[SS134]
[SS672]
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
Publicidad
Capítulos
