Publicidad
OPTION 2
ELECTRIC CONNECTIONS
1. Remove the access screws in bottom of the outlet shelf. Lift up and remove outlet shelf for access to electrical connections.
2. Carefully cut plastic tie before making the connections.
3. Feed the electric wire through the access hole in the back of the cabinet.
1
4. Make connections. Neutral to white or ribbed. Line to black or smooth. Ground to green.
5. Engage top of electrical shelf into back raceway and rotate down to close, making sure not to crimp or pinch wires and connections.
6. Replace two access screws on outlet shelf.
4
Ground
Black
White
Field Wire
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
2
5
8
3
6
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
4" MAX
102 mm MAX
Publicidad
Capítulos
