Publicidad
OPTION 1
ELECTRIC CONNECTIONS
1. Remove the access screws from the plate located on the back of the cabinet. Remove rear plate to access wires.
2. Carefully cut plastic tie before making the connections.
3. Feed the electric wire through the access hole in the plate as shown.
1
4. Make connections. Neutral to white or ribbed. Line to black or smooth. Ground to green.
5. Reinstall rear access plate.
4
Ground
Black
White
Field Wire
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
2
5
7
3
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
4" MAX
102 mm MAX
Publicidad
Capítulos
