Taking Weight And Body Fat Readings; Understanding Your Readings; Programming Guest Mode - Tanita BF-662 Manual De Instrucciones

TAKING WEIGHT AND BODY FAT READINGS

After programming your personal data you are ready to take a reading.
Select Personal Key
Using your toe, tap your pre-programmed Personal key. (Release the key
within 3 seconds or the display will show "Error".) The unit will beep and
the display will show the programmed data. The unit will beep again and
the display will show "0.0". Now step onto the platform.
Note: If you step onto the platform before "0.0" appears the display will show "Error" and you
will not obtain a reading. Furthermore, if you do not step onto the measuring platform
within about 60 seconds after "0.0" appears, the power is shut-off automatically.
Get Your Readings
Your weight will be shown first. Continue to stand on the platform.
"00000" will appear on the display and disappear one by one from left to
right. Your body fat percentage and Body Fat Range will appear on the
display screen. The display will then flash your weight and body fat
percentage alternately three times.
UNDERSTANDING YOUR READING
Healthy Range Indicator (Standard Adults only*)
Your body fat monitor/scale automatically compares your body fat reading
to the Healthy Body Fat Range chart.
Following your body fat percentage reading, four black squares will flash
along the bottom of the display, identifying where you fall within the Body
Fat Ranges for your age and gender. For example, if the squares appear
above the Green (0) area your range is within the Healthy Range – if they
appear over the Yellow (-) area, your reading is below the Healthy Range.
For more about the Healthy Range, see page 2.
Yellow(-) : Underfat; below the healthy body fat range. Increased risk
for health problems.
Green(0) : Healthy; within the healthy body fat percentage range for your
age/gender.
Orange(+) : Overfat; above the healthy range. Increased risk for health
problems.
: Obese; high above the healthy body fat range. Greatly
Red(++)
increased risk of obesity-related health problems.
PROGRAMMING THE GUEST MODE
The Guest mode allows you to use the monitor without losing the
information already assigned to a Personal Key.
To programme the Guest mode, use the Down button marked with a "G" to
turn on the power. Then follow steps 3 through 5 in "Setting and Storing
Data" (p.5.) The unit will beep twice and the display will show "0.0". Step
onto the platform. Next follow the directions for "Get Your Reading" (p.6).
Note: If you step onto the platform before "0.0" appears the display will show "Error" and
you will not obtain a reading.
Note: Even if you step off the platform after all
the results are displayed, the alternating display of
body weight and body fat percentage will be
repeated three times. The unit will then shut
down automatically.
Under Healthy Over
Note: If you select Athlete mode on the BF-662,
the unit will not display the Healthy Range
Indicator. *Athletes may have a lower body fat
range based on their particular sport or activity.
(range of user age is between 20-79)
GB
Obese
6