Duraflame DFI-5010-01 Manual De Instrucciones página 6

OPERATION INSTRUCTIONS
Function
POWER
FLAME
HEATER
TIMER
A464
Icon
The POWER button supplies power to all the functions of
the stove. Pressing the POWER button again the stove will
be put in standby mode. This will turn off all functions at
once but will hold the settings in the memory. By
pressing the Power button again the unit will turn on at the
same settings.
With the power on press and hold the Power button on
the control panel for 10 seconds to disable or re-enable the
heater function. Once disable or re-enabled the emberbed
lights will flash multiple times.
There are 5 brightness levels that can be selected and
OFF (00) setting.
Settings F5 - F1 decrease in brightness.
The stove contains a fan forced infrared element heater.
The thermostat setting range is 62°F - 82°F (17°C - 27°C) or
continously ON or OFF(00).
The thermostat is adjustable by 2°F or 1°C increments by
pressing the HEATER button on the control panel.
To change between °F and °C press and hold the HEATER
button on the control panel for 3 seconds.
The button on the remote only turns the heater on/off to the
thermostat setting selected with the control panel.
Pressing the timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
9H and off (00).
Description
6
www.tsicustomerservice.com