Pipe Bracket And Extraction Arm Mounting Bracket - Kemper 1502198 Instrucciones De Montaje

Pipe bracket and Extraction Arm Mounting Bracket

Art. Nr.: 1502198
Hinged Cantilever
Fig. 2-3
● Install the pipe bracket (7) with the screws (8) - M8 x 20 - 8.8 - and
corresponding washer on the hinged cantilever (9).
● For information regarding the required number of pipe brackets (7)
and screws (8) refer to the packaging.
● For the 3m cantilever (see Figure) two pipe brackets (7)
are required for assembly.
● For 2m cantilever a pipe bracket (7) is required for assembly.
Fig. 2-3.2
● Install the mounting of the extraction arm (10) with the
clamping profile (11), six screws (12) - M8 x 25 - 8.8 - and
corresponding washers on the hinged cantilever (9).
2-3