Descargar Imprimir esta página

Green Led Pump Wilo-Yonos Para Pwm (Fig. 28) - Sime MURELLE HM Para El Instalador

Publicidad

Idiomas disponibles

Idiomas disponibles

contact qualified technical personnel
to check the seal of the heating system
(to check whether there are any leaks).
OPEN
APRE
– ALL 03
Request assistance from qualified
technical personnel.
– ALL 04
Request assistance from qualified
technical personnel.
– ALL 05
Request assistance from qualified
technical personnel.
– ALL 06 (fig. 27/c)
Press the key
f the controls (2) to
re-start the boiler.
If the anomaly persists, request assi-
stance from qualified technical person-
nel.
2
– ALL 07 (fig. 27/d)
Press the key
of the controls (2) to
re-start the boiler.
118
If the anomaly persists, request assi-
stance from qualified technical person-
nel.
2
– ALL 08
Request assistance from qualified
technical personnel.
– ALL 09
Request assistance from qualified
technical personnel.
– ALL 10
Request assistance from qualified
Fig. 27/a
technical personnel.
– ALL 13 (fig. 27/e)
Press the key
re-start the boiler.
If the anomaly persists, request assi-
stance from qualified technical person-
nel.
2
– ALL 14
Request assistance from qualified
technical personnel.
– ALL 15
Request assistance from qualified
technical personnel.
– "
FLASHING"
Fig. 27/c
Request assistance from qualified
technical personnel.
– From ALL 20 to ALL 29
Request assistance from qualified
technical personnel.
– From ALL 30 to ALL 35
Request assistance from qualified
technical personnel.
– ALL 70 and ALL 71
These alarms appear on the CR 73
remote control display. Request assi-
stance from qualified technical person-
nel.
GREEN LED PUMP WILO-YONOS PARA
PWM (fig. 28)
If the LED signal is missing or the colour
changes (blinking red/green or blinking
red), contact an authorised technician.
Fig. 27/d
GAS CONVERSION
of the controls (2) to
If it is necessary to change to a different
type of gas, request assistance only from
authorised technical personnel.
MAINTENANCE
Annual maintenance of the appliance
should be planned sufficiently in advance,
requesting the assistance of authorised
technical personnel.
DISPOSAL OF THE EQUIPMENT
(EUROPEAN DIRECTIVE 2002/96/CE)
Once it reaches the end of its operating life,
the equipment MUST BE RECYCLED in line
Fig. 27/e
with current legislation.
IT MUST NOT be disposed of together with
urban waste.
It can be handed over to recycling centres,
if there are any, or to retailers that offer
this service.
Recycling prevents potential damage to the
environment and health. It allows to reco-
ver a number of recyclable materials, with
considerable savings in terms of money
and energy.
LED
Fig. 28

Hide quick links:

Publicidad

loading