Alcad 915 Serie Manual Del Usuario página 82

When all the multicast addresses have been configured completely, click on the Apply & Start button to apply
the configuration and to start streaming the services.
9
Now that the multicast parameters have been configured, we can proceed to the final configuration, namely
that of SAP Management. By default, if we do not open this menu, SAP announcements will be sent to the stan-
dard IP address and port (224.2.127.254:9875), as will all the TV/radio services selected previously.
If we wish to modify this configuration, we open the menu by clicking on the SAP management button.
To change the IP address that announcements will be sent to, we click on the Enter New button, type in the des-
ired address and port and confirm by clicking the Apply button located to the right of the address and port
fields. We can configure the interval between the dispatch of these SAP announcements by typing a number
in the Announcement Interval field. In our example, we have chosen an interval of 2 seconds.
To choose the TV/radio services that will be sent, we place a tick (by clicking once) in the boxes next to the
names of the TV/radio services we wish to broadcast.
80 - ALCAD IPTV web configurator manual
ENG