Weka 651.3838.00.00 Instrucciones De Montaje página 4

Dear customer
•
Read these instructions through completely before assembling your product in order to avoid errors in
assembly or damage.
•
IMPORTANT
Please use the enclosed packing list to check immediately that your product has been delivered
complete and intact.
•
Please do not dispose of the packing list before the guarantee period has expired. This list enables you
to check that all the individual parts are present. It should be retained along with the proof of purchase.
Any complaints which may arise can probably be easily rectified with this list. The item numbers on the
packing list do not correspond to the item numbers in the following assembly instructions.
•
We recommend that 2 people carry out the assembly.
•
In order to prevent accidents, we recommend that children are kept out of the direct vicinity during
assembly.
•
We reserve the right to make further technological developments. This means that there many be minor
deviations in the illustrations.
•
Please do not simply throw away the packaging material. Paper, card and corrugated board as well as
plastic packaging materials should be placed in the correct collection containers.
RECOMMENDATIONS
•
Please drill pilot holes for all screw connections to avoid damaging the wood. The following symbol in the
instructions will indicate when this is necessary:
•
Protect the wood from hours of direct sunlight and moisture.
•
Wood is a natural product. Fluctuations in colour, knots and cracks are normal and have no influence on
the statics.
•
The floor beams are aligned in accordance with figure 1 and then fixed to the substructure.
•
The fixing material for connecting the floor beams to the foundation in not included within the scope of
this delivery.
Wood protection
The wood must not be exposed to sun or moisture before and during assembly. Before installation, you
must treat your wood product with appropriate wood protection (also on points no longer accessible after
assembly).
Pressure-treated (pt) garden wood which has a very high moisture content after production due to the
process tends to get stains and surface mould during storage. These neither destroy the wood nor affect
its strength. The mould can be removed with a brush, for example, after the wood has dried and weathering
will remove this visual flaw.
The wood protection agent must guarantee extensive protection against blue stain, fungus , rotting, mould
and wood-eating insects, etc.. The agent must reapplied at least every two years. It is also recommended
that the interior of the cabin be treated, however it is only essential that the exterior is treated.
Technische Änderungen vorbehalten!
+
Alle Maßangaben sind ca. Maße.
3
 Copyright HRB 3662