PERSONALIZED A PLACE NAME
• Press and Hold [ SET ] for 3 second. In the information window,
and then press [
country Germany which is represented in
• Press [ SET ] key to confi rm the Country (let's said we select Germany right now), and then
the information window will show
• Then, press [
] or [
information window such as
you would like to enter a new city which is near the region of Frankfurt am Main.
• Press the ‚MEM' key ; a cursor fl ashes on the fi rst position of the Information Window
Then following input commands then apply:
KEY
[
] or [
]
SET
TEST
** The place that you have selected to enter your own description will still exist under its own name.
• Press [ SET ] key to confi rm and exit
SET THE TIME ZONE, LANGUAGE and CONTRAST
• Press and Hold [ SET ] for 3 second,
• Press [ SET ] again, then
[
] or [
] key to adjust the time zone.
• Press [ SET ] again, then the language will be shown in the Information Window, press
[
] or [
] key to select your desired language. There are total seven language for
selection, namely German, English, Spanish, French, Italiano, Dutch, Swedish.
• Press [ SET ] again, then
[
] or [
] key to adjust the LCD contrast Level.
• Press [ SET ] again and
it will change to the City-Date-Time Mode.
REMARK: If you do not have any selection into the Setup mode up to 60 seconds, it will automatically
exit the setup mode. The Information Window will show City / Sunrise & Sunset Time / Time & Date.
] or [
] key to select the country. Let's said you have selected the
.
] key to select the city, and the city name will be shown in the
Function
Selection of a letter
<1> Accept the selected letter and jumps to the next position. OR
<2> If you have not entered any letter (in other words, if only the cursor is fl ashing at
the last position), confi rm the entry with this key and your place will also be included in
the memory with immediate effect
One position back in the data entry process
will be shown at the information window. After 4 seconds,
.
means the city ‚Frankfurt am Main', and
is shown in the Information Window.
is shown in the Information Window, press
is shown in the Information Window, press
28
is shown,