What Is What - Hitachi CS 36DL Manual De Instrucciones

English

WHAT IS WHAT?

1. Switch : Device activated by the fi nger.
2. Lock-off button : Button that prevents the
accidental operation of the trigger.
3. Chain brake : Device for stopping or locking
the saw chain.
4. Spiked bumper : Device for acting as a pivot
when in contact with a tree or log.
5. LED light : Light that illuminate the cutting
edge.
6. Oil tank cap : Cap for closing the oil tank.
7. Oil sight glass : Window to check chain oil
amount.
8. Front handle : Support handle located at or
towards the front of the main body.
9. Battery : Power source to drive the unit.
10. Rear handle (Top handle) : Support handle
located on the top of the main body.
11. Hook : Tool for hanging the unit with rope etc.
12. Tension dial : Device for adjusting tension of
saw chain.
13. Knob : Knob for securing tension dial and side
cover.
14. Saw chain : Chain, serving as a cutting tool.
15. Guide bar : The part that supports and guides
the saw chain.
16. Side cover : Protective cover to the guide bar,
saw chain, clutch and sprocket when the chain
saw is in use.
17. Charger : For charging the battery.
18. Oil feeder : Container for oil.
19. Chain case : Case for coverring the guide bar
and saw chain when the unit is not being used.
20. File : Tool for sharpening saw chain.
21. Bolt : Bolt for fi xing the side cover in place.
22. Hexagonal bar wrench : Tool for loosening and
tightening the bolt.
4
3
4
5
6
7
10
11
21
16
12
17
19
22
2
1
9
8
15
14
13
18
20