Tyre Mounting - Corghi A 224 Manual De Uso

TYRE MOUNTING

WARNING
Always check that the size of the tyre is
compatible with the size of the wheel
before proceeding with mounting.
- Before you start with tyre mounting op-
erations, apply a liberal amount of tyre
manufacturer approved rubber lubricant
to both beads (fig.19).
Lubricated beads require less force to
mount/seat and are protected against
torsional damage.
56
Make sure that the tyre is in good condi-
tion without any signs of undue wear or
damage.
- Place the tyre over the wheel and tilt the
tower forward. Position the bottom bead
(fig.20) beneath the right hand side of the
mount/demount head.
18
19
20
A 224 - A 224 TI