Maintenance And Care - bora PL 540 Manual De Instrucciones

Maintenance and care

Removal and cleaning of the grease filter
First remove the cover. To achieve this, set
1.
the cover to the central position and pull it
upwards out of the extractor unit.
Now remove the adjusting wheel by pushing it
2.
towards the centre of the extractor, turning it
clockwise by 90° and removing it in an
upward motion. Always take care not to drop
the adjusting wheel.
Now remove the grease filter from the vent of
3.
the extractor.
Clean the grease filter in the dishwasher with
4.
the air discharge openings facing down.
Reinstall the components in the reverse order
5.
after cleaning as shown in depictions 1-3.
1
Cleaning / maintenance of the extractor unit
Regular cleaning of the surface areas saves the hassle
of removing tougher stains later.
To clean the surface of the extractor unit, only use a
sponge or soft cloth, water and suitable cleaning
agents.
It is recommended to use agents with protective effect,
as the protection film protects the surface from
incrustation and damage.
Never clean withabrasivedetergents, sharp objects,
abrasive all-purposespongesorwirewool.
Do not use caustic detergents.
The extractor unit surface can be damaged due to
improper treatment or cleaning.
2
21
3
GB