Hitachi NT50AF Manual De Instrucciones Y Seguridad página 31

Skipping fasteners; Worn piston cushion
intermittent feed
Tar/dirt in driver chan‑
nel
Air restriction/inade‑
quate air flow through
quick disconnect
socket and plug
Worn piston O‑ring
Tool dry, lack of lubri‑
cation
Damaged pusher
spring
Low air pressure
Loose magazine nose
screws
Fasteners too short
for tool
Bent fasteners
Wrong size fasteners
Broken/chipped driver
Dry/dirty magazine
Worn magazine
Fasteners jam in Tool Driver channel worn
Wrong size fasteners
Bent fasteners
Loose magazine nose
screws
Broken/chipped driver
Contact Hitachi for
replacement.
Contact Hitachi for
replacement.
Replace quick discon‑
nect fittings
Contact Hitachi for
replacement.
Use Air Tool Lubricant
Contact Hitachi for
replacement.
Check air supply
equipment
Tighten all screws
Use only recommend‑
ed fasteners
Discontinue use of
these fasteners
Use only recommend‑
ed fasteners
Contact Hitachi for
replacement.
Clean / lubricate; Use
Air Tool Lubricant
Contact Hitachi for
replacement.
Contact Hitachi for
replacement.
Use only recommend‑
ed fasteners
Discontinue use of
these fasteners
Tighten all screws
Contact Hitachi for
replacement.
— 31 —
English