Hitachi NT50AF Manual De Instrucciones Y Seguridad página 5

SAFETY
4. KEEP FINGERS AWAY FROM TRIGGER WHEN NOT DRIVING
FASTENERS TO AVOID ACCIDENTAL OPERATION.
Never carry the Tool with finger on safety trigger since you
could drive a fastener unintentionally and injure yourself or
someone else.
Always carry the Tool by the handle only.
5. CHOICE OF TRIGGERING METHOD IS IMPORTANT.
Please read and understand page 23 of "METHODS OF
OPERATION."
6. DO NOT EXCEED 90 psi. (6.2 bar 6.3 kgf/cm
exceeds 200 psi (13.7 bar 14 kgf/cm
7. ALWAYS WEAR EAR AND HEAD PROTECTION.
Always wear ear protection to protect your ears from loud
noise.
Always wear head protection conforming to ANSI Z89.1‑1986 to
protect your head from flying objects.
8. STORE TOOL PROPERLY.
When not in use, the Tool should be stored in a dry place. Keep
out of reach of children. Lock the storage area.
9. KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas of unneces‑
sary tools, debris, furniture, etc.
10. NEVER USE IN PRESENCE OF FLAMMABLE LIQUIDS OR
GASES.
The Tool produces sparks during operation. Never use the Tool
in sites containing lacquer, paint, benzine, thinner, gasoline,
gases, adhesive agents, and other materials which are combus‑
tible or explosive.
‑ Continued
WARNING
)
2
Do not exceed
maximum recom‑
mended air pres‑
sure 90 psi (6.2 bar
6.3 kgf/cm
Never connect the
Tool to pressure
which potentially
) as the Tool can burst.
2
— 5 —
English
)
2