Assembly Instructions; Tbf; Set Up; Tbf-300/Tbf-300A - Tanita TBF-300A Manual De Instrucciones

5. Assembly Instructions

a

TBF-410

Column
Attachment
Bottom Cover
Attachment Screws
a Attaching the Column to the Weighing Platform
Feed the 2 cords from the column through the hole in the
weighing platform.
Screw in the 4 column attachment screws to attach the
column to the weighing platform.
Remove Bottom Cover.
Insert the 2 cords from the column as displayed, and then
replace the Bottom Cover using the 2 Bottom Cover
Attachment Screws . When
replacing the bottom cover, please
put the cords in the appropriate
location so they will not be squeezed
between the cover and the weighing
platform. This may damage the
cords.
12

6. Set Up

a

TBF-300/TBF-300A

a Connecting the Weighing Platform to the Control Box
1. Connect the cable from the weighing platform to the jack located on the back of the control box. The
should be facing up when inserted.
2. Connect the plug of AC adapter to the DC jack located on the back of the control box.
3. Insert the power cord to the AC adapter, and plug it into a power outlet.
WARNING
• In order to reduce the risk of electric shock, never insert or remove the power cord
with wet hands.
CAUTION
• Use only the Tanita AC adapter provided with the unit.
• Put the weighing platform on a flat, level surface.
(TBF-300A ONLY)
CAUTION
Place the Weighing Platform on a
level surface to ensure accurate
weight measurement. Position the
Weighing Platform so that the
bubble in the level is in the middle
of the red circle.
on the plug
13