Weight Only Function - Tanita TBF-300A Manual De Instrucciones

WEIGHT Kg WEIGHT Kg
CLOTHES lb CLOTHES lb
MALE cm MALE cm
FEMALE ft.in FEMALE ft.in
ATHLETIC AGE
ATHLETIC AGE
STEP ON % FAT STEP ON % FAT
Posterior Electrodes
Anterior Electrodes
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
30
Mistakes may be corrected by pressing the [CE] key.
Pressing this key repeatedly will also allow the user to
correct previously entered information.
7. STEP ON:
The flashing arrow will appear next to STEP ON after the
LCD display " ".
8. Taking Measurement:
Step on the weighing platform in bare feet. Make sure
heels are placed on the posterior electrodes, and the front
part of the feet are in contact with the anterior electrodes.
9. Weight is displayed on the upper portion of the LCD.
10.Impedance Measurement:
After weight stabilizes, impedance measurement is taken.
This is denoted by four "bubbles" which appear on
the bottom half of the LCD. As the measurement is being
taken, the bubbles will begin to disappear one by one.
Do not step off from the weighing platform
until the final bubble has disappeared, and the
display emits a short beep.
11.Measurement is Now Complete
Weight and percent body fat will be displayed on the
LCD, and detailed results will automatically print out. The
LCD will return to the Gender and Body Type screen
(Step 3) in about 10 seconds, which allows for convenient
screening.
Please refer to P.32 for an explanation of the printout, or
Technical Notes booklet for more details.
12.If all measuring is complete, press the [ON/OFF] key to turn
off the power.
a

WEIGHT ONLY FUNCTION

WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
1. After turning on the unit, press the [WEIGHT ONLY] key.
After a momentary display check, "0.0" will appear on the
LCD. If measuring units need to be changed, do so at this
time by pressing the [kg/lb] key.
An arrow on the LCD will follow the selection of weighing
units.
2. Weight Measurement
Step on the weighing platform. Weight will be displayed
on the LCD.
3. When measuring is complete, press the [ON/OFF] key to
turn off the power.
•No printer is available when measuring weight
only.
•If body composition analysis is desired, turn
the unit off and then on, using the [ON/OFF]
key.
Important Note:There is no automatic weight lock
function.
31