Cleaning And Maintenance - Joyello JL-1050 SECURFIX BRUUM Manual De Instrucciones

GB
outwards.
Then thread the abdominal straps out of the slots.
To replace the padding, use the same process in reverse.

CLEANING AND MAINTENANCE

Cleaning and maintenance must only be carried out by adults.
Clean the plastic parts with a damp cloth and then dry them. Do not use solvents or other similar
products.
Do not clean polystyrene components using solvents or other similar products.
The child seat's moving parts must not be lubricated in any way
Check the restraint system periodically to ensure that all components are in perfect working order.
CAUTION! the child seat's harness must never be washed, but simply cleaned with a cloth and
mild detergent.
CAUTION! In the event that your child seat becomes damaged or heavily worn, it must be replaced
as it may no longer meet its original safety specifications.
Important: The padding is a fundamental element of your child's safety. Never use the child seat
without it, nor substitute it with another non-approved product to avoid putting your child's safety
at risk and compromising the correct operation of the device.
When the child seat is not installed in your vehicle, we recommend storing it in a dry place, away
from heat sources and protected from dust, humidity and direct sunlight.
CLEANING THE HARNESS BUCKLE
CAUTION! A defective harness buckle can cause injury. Never lubricate the buckle! Check that there
are no foreign bodies in the buckle, such as dirt or food!
Clean the buckle with lukewarm water and always dry it completely.
Instructions for washing the padding:
The padding can be removed and washed. To remove the padding, see the "REMOVING THE
PADDING" section.
Follow the washing instructions shown on the padding's label carefully.
Dry the padding completely before reusing or repositioning it
The washing symbols and their meanings are shown below.
Wash cold water 30°
Suitable for dry cleaning in Tetrachloroethylene
32