Cleaning And Maintenance - Royal Catering RCCM-250-2GN Instrucciones De Uso

APPLICATION
Machine is intended for use with chocolate, cheese or sauces.
USE OF THE DEVICE
1. Plug in the device.
2. Turn on machine with power switch to "I".
3. Display will turn on.
4. First press the „Set" button on temperature display one time.
5. Press the "˄" or "˅" button to select your required temperature. After 1 to 3
seconds the display will revert back to actual temperature.
6. The orange light will come on when heating of the element. This will go on and
off automatically during heating process.
7. When finished with the machine turn off with the red rocker switch to the "0"
position.
THE CONSTRUCTION OF THE DEVICE
1. Power switch
2. Heating control lamp
3. LED display with temperature
8
1. buttons for setting the temperature
2. Set button
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If it should be the case,
please contact your customer service to solve the problem.
What to do in case of problem?
Please contact your customer service and join following information:
• Invoice number and serial number (the latest is to be found on the technical
plate on the device)
• If relevant, a picture of the damaged, broken or defective part
• It will be easier for your customer service clerk to determinate the source of
the problem if you make a detailed and precise description of the matter. A void
formulations like "the device doesn´t heat", which may mean that it doesn´t heat
enough or even not at all. Though, those two possibilities have a different causati-
on!
• Check with a thermometer that the device measures the temperature within
the cabin properly. (Caution: do not set the thermostat on a value exceeding the
maximal value of your thermometer!)
The more detailed your information, the quicker the customer service will be able to
answer your problem rapidly and efficiently!
CAUTION: Never open the device without the authorization of your customer ser-
vice. This can lead to a loss of warranty!

CLEANING AND MAINTENANCE

• Pull the main plug (pull the plug, not the cable) and let the unit cool down.
• Clean the unit only with a damp cloth.
• Do not use any aggressive detergents.
• Never immerse the unit into water!
Rev. 14.03.2017 Rev. 14.03.2017 9