DUPLEX TURBO
OPERATION AND USE
The tank 1 can be filled in the following ways:
A)
With the tank removed from the appliance:
1)
Remove the tank 1 and refill under a water tap.
2)
Add a non-foaming detergent.
3)
Stir the solution and re-insert the tank 1 into its housing.
B)
With the tank fitted to the appliance:
1)
Mix the detergent with water in a recipient.
2)
Pour the liquid obtained into the tank 1.
A
6.1.2
Recovery tank
The dirty liquid recovery is achieved by means of the rotation of the brushes 2, which attack
the dirt, trapping it and centrifuging it toward the two conveyors 3. The dirt accumulated
on the active surfaces of the conveyors 3 is collected by the scrapers 4 and deposited
into the recovery tank 5.
WARNING
We recommend that you lubricate the rubber conveyors (3) regularly
using an ordinary silicone spray available in retail outlets.
B
1
102
1
F.36
Rev.
1.0