Vega VEGAWELL S 51 Manual De Instrucciones página 23

Reference conditions and actuating variables (similar to DIN EN 60770-1)
Reference conditions according to DIN EN 61298-1
Temperature
-
Relative humidity
-
Air pressure
-
Determination of characteristics
Characterstic curve
Reference installation position
Influence of the installation position
Deviation determined according to the limit point method according to IEC 60770
Deviation
Influence of the product or ambient temperature
Average temperature coefficient of the zero signal
Thermal change, current output
Long-term stability (similar to DIN 16086, DINV 19259-1 and IEC 60770-1)
Long-term drift of the zero signal
Ambient conditions
Ambient temperature
Storage and transport temperature
Process conditions
Product temperature
Vibration resistance
Electromechanical data
Suspension cable
Structure
-
Wire cross-section
-
Wire resistance
-
Tensile strength
-
Max. length
-
Min. bending radius
-
Diameter
-
Voltage supply
Supply voltage
VEGAWELL S 51
+15 ... +25 °C
45 ... 75 %
860 ... 1060 mbar/86 ... 106 kPa
Limit point adjustment according to IEC 61298-2
Linear
upright, diaphragm points downward
< 0.2 mbar/20 Pa
< 0.2 %
< 0.15 %/10 K
< 0.15 % with -40 ... +60 °C
< 0.1 % /2 years
-40 ... +60 °C
-40 ... +100 °C
-20 ... +60 °C
mechanical vibrations with 4 g and 5 ... 100 Hz
six wires, one suspension cable, one breather
capillary, screen braiding, foil, mantle
0.5 mm²
≤ 0.036 Ohm/m
≥ 1200 N
1000 m
25 mm
approx. 8 mm
9.6 ... 36 V DC
Supplement
5
23