Descargar Imprimir esta página

Contents; Transport And Storage; Safety - Meterman AC50 Manual De Uso

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38

Contents:

1 pce. METERMAN Leakage Clamp AC50
2 pce. test leads with probes (red/black)
2 pce. batteries 1,5V IEC LR6
1 pce. Carrying Case
1 pce. users manual

Transport and Storage

• Please keep the original packaging for later transport, e.g. for calibration. Any
transport damage due to faulty packaging will be excluded from warranty claims.
• In order to avoid instrument damage, it is advised to remove batteries when not
using the instrument over a certain time period. However, should the instrument
be contaminated by leaking battery cells, you are kindly requested to return it to
the factory for cleaning and inspection.
• Instruments must be stored in dry and closed areas. In the case of an instrument
being transported in extreme temperatures, a recovery time of minimum 2 hours
is required prior to instrument operation.

Safety

• The METERMAN Leakage Clamp AC50 has been manufactured and tested to
comply with the safety regulations for electronic measuring equipment contained
in IEC61010 and EN 61010, and left the factory in a safe condition. To maintain
this condition, the user must observe the safety instructions contained in this
users manual.
• To avoid electric shock, safety measures must be observed when working with
voltages higher than 70V d.c. or 33 V r.m.s.(46.7 V peak).
• Before each measurement make sure that the test leads and the instrument are
undamaged.
• Only handle test leads and probes on the grips provided. Avoid touching probes
under any circumstances.
• Measurements in dangerous proximity of electrical installations are only to be
executed when instructed by a responsible electrical specialist, and never alone.
• The relevant safety regulations for electrical plant and equipment must be obser-
ved during all operations.
• The instrument must only be used in the specified ranges.
• Before opening the instrument, it must be disconnected from all circuits.
• Protect the instrument from prolonged exposure to direct sunlight.
3

Publicidad

loading