Appropriate Usage; Feature Diagram - Meterman AC50 Manual De Uso

Appropriate Usage

• The instrument may only be used under those conditions and for those purposes
for which it was conceived. For this reason, in particular the safety references, the
technical data including environmental conditions and the usage in dry environ-
ments must be followed.
• When modifying or changing the instrument, the operational safety is no longer
ensured.
• The instrument may only be opened by an authorised service technician, e.g. for
fuse replacement.

Feature Diagram

1. Induction coil (clamp)
2. Selector switch, for type of
measurement
3. Data hold button, to memorise
reading
4. MIN/MAX value (page 8)
5. Zero setting / relative value function.
Once this button is pressed, the current
reading shall be set to zero and be used
as a zero reference value for all other
subsequent measurement.
6. Frequenzy range select switch. At
50/60Hz position, only the low frequen-
cy signal is measured. At Wide positi-
on, signal from 40 - 1kHz is measured.
7. Digital display
8. Input socket, for measuring voltage,
resistance, continuity testing
9. Hand-hold area incl. Barrier (9a)
10. Low-battery symbol
11. Zero Point / Relative Value Symbol
12. Hold symbol (Data Hold is active)
13. Min/ Max Symbol
14. Continuity Symbol
15. Analogue Bargraph
9a
6
9
11
10
4
12 13 14
1
2
3
4
5
7
8
15