Checklist Before Each Use; Checking The Engine Oil Level - Zipper Maschinen ZI-RPE60 Manual De Instrucciones

The use of paint thinners, petrol, aggressive chemicals or abrasives leads to material damage
to the surfaces! Therefore use only mild detergents for cleaning!
Clean the machine and remove dirt and dust if necessary.

If the air filter is dirty, blow the filter cartridge from the inside by moving a jet of dry

compressed air up and down. Continue until all dust has been removed. Replace the
air filter with a new one if necessary.
Check the carburettor for external dirt and dust and clean it with dry compressed air if

necessary.
Check the nuts and bolts for tightness. (Screws or bolts loosened by vibrations can

lead to accidents!)

15.3.1 Checking the engine oil level

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE60 ZI-RPE9034

Checklist before each use

Too low an oil level will damage the engine and shorten the life of the machine.
Therefore, check the engine oil level before every start and top up the engine oil if
necessary.
5. Install the transport device using the threaded rod.
6. Take the throttle cable which is rolled up on the
engine and fix the throttle clamp on the handle.
7. Make sure that the upper throttle lever is set to
minimum ("turtle" symbol).
8. Finally, secure the throttle cable to the retaining
bracket with two cable ties.
9. If necessary, attach the rubber mat to the bottom of
the machine using the metal strips and screws
supplied.
N O T I C E
N O T I C E
ASSEMBLY
34