König Electronic KN-WS600 Manual De Uso página 2

Weather Station
Wireless Professional Weather Station
Thank you for purchasing the new generation of professional weather stations. Designed and engineered with
state-of-the-art technology and components, this instrument will provide accurate and reliable measurement
of wind speed and direction, wind chill, daily/weekly/monthly/accumulated rainfall, barometric pressure,
weather forecast, indoor/outdoor humidity, temperature, heat index and dew point, as well as a
radio-controlled alarm clock. Read this manual carefully to fully explore the features and functions of the new
product.
In this package you will find:
One monitor (receiver)
One anemometer (transmitter – transmits wind and outdoor channel-1 temperature/humidity data)
One rain gauge (transmitter – transmits rainfall data)
Mounting hardware for rain gauge (4 sets of screws and plastic screw plugs)
Mounting hardware for anemometer (2 pieces of U-shaped metal plates, 4 sets of hex screws and nuts)
One owner's manual
Additional tools needed for installation
- Small Phillips screwdriver
- Hexagonal key
- Electric drill
- Pencil
- Level
- Mast, 1 – 1.25 inches (2.54 – 3.18 cm) in diameter (to mount the anemometer)
Installation
The weather station operates at 433 MHz and does not require wire installation among the component parts.
To ensure successful installation and the best performance, we recommend that you follow the installation
instructions in the order they appear in this manual.
1. Battery and adapter installation for the monitor (receiver)
Main power source: Open the battery door, insert 6 pieces of AA batteries according to the polarity indicated,
and close the battery cover.
Optional power source: Plug in a 6.0 V adapter jack into the side of the unit for basic operation (Adapter not
included).
Sea level pressure setting
After battery/adapter installation, the monitor will enter directly into sea level pressure setting mode and the
pressure reading will flash. Press "▲" or "▼" to set the sea level pressure value. Press "PRESSURE" to
confirm the setting and exit. This allows the unit to provide a more accurate weather forecast and pressure
reading.
You can also set the sea level pressure any time after the installation is completed. For more information, see
the "WEATHER FORECAST AND BAROMETRIC PRESSURE" section.
Note: you may obtain the current sea level pressure from the weather website for your location.
2. Selecting a location for the anemometer
Select a mounting location for the anemometer that is:
- Outdoors, not blocked on top or on the sides, so that wind can freely reach the anemometer
- Within 100 meters (328 feet) of open area from the monitor. Reduce the distance if there are obstacles
between the anemometer and the monitor
The best location for the anemometer is usually mounted on a mast in an open area where wind is not
blocked on top or on the sides, or above roof level on the building where the monitor is located.
Testing the effective transmission range
Before mounting the anemometer, measure the distance between the monitor and anemometer and make
sure it is within the effective transmission range. It is recommended to perform a simple RF transmission test
before mounting.
1. Place the monitor in your selected indoor location and install the adapter and batteries (see "Battery and
adapter installation for the monitor" section above).
ENGLISH
2