LINEACCESSORI Meta Voice Manual De Uso página 8

EN
Introduction
Dear Customer,
Before reading the operating instructions described on the next pages, we wish to thank
you for choosing an original product from the accessories range. We are pleased to provide
some general information that will be particularly useful to discover more about your new
hands-free kit.
Meta Voice is a hands free appliance that uses Bluetooth technology.
The main reason for the creation of Bluetooth technology is its capacity to enable dialogue
and interaction between diff erent appliances (mobile phones, notebooks, PDA, hands
free systems...) without the need for wires to connect things generally known as wireless
together, provided the various paired appliances are located at a distance (or range) of no
more than 5 m from one another.
Wireless refers to the type of communications, to monitoring and to a series of controlling
systems where the signals travel through space and not along wires or transmission cables.
In a wireless system, transmission mainly takes place by radio frequency (RF).
Bluetooth technology was, therefore, specifi cally designed so that small appliances can
communicate with one another without wires. The key concept that inspired this techno-
logy was that of completely eliminating the wires needed for communications between
appliances. Meta Voice is classifi ed as Bluetooth 2.1, class 2.
Operating modes
The way the system operates is described below.
Always refer to the operating manual for your mobile phone for pairing and recogni-
tion procedures.
The system is operational when the dashboard is switched on, unless the dashboard is
switched off when a telephone call is being taken. In this case, the system will remain ope-
rational so the call can continue for a maximum of 20 minutes more.
Any activity involving interaction with your mobile phone must be done when the vehicle
is not in motion.
The various activity stages of the product, which features a TouchPad control, are identifi ed
by the LED status, when the ignition is switched on.
• Fast fl ashing (1sec): the system is searching to pair up to a telephone.
This phase lasts 60 sec. at most, after which the led goes out and remains off .
• Lit without fl ashing: the system is connected up to a telephone.
Pressing the button will result in a tone being heard through the speaker, regardless of the
operating status of the system.
Pairing
The pair is the set of procedures that enables the reciprocal identifi cation between the
mobile phone and the hands-free system, enabling the subsequent connection.
In order to use the hands free set, the telephone and the hands free set must be paired
together.
8