Machine Components; Scope Of Delivery - HSM Primo 1401 Instrucciones De Servicio

3

Machine components

1 2 3 4
1 Cut material container
2 Safety instructions
3 Feed opening
4 Automatic start stop control
5 Rocker switch
: On
: Off, Reverse
6 Name plate

4 Scope of delivery

• Paper shredder, ready for connection, in
carton packing
• 5 Bags for shredded material
• Special cutting block oil 50 ml (cross cut)
• Operating instructions
Acces so ries
• 10 waste bags, order no. 1.661.995.150
• Special cutting block oil 250 ml
order No.: 1.235.997.403
See page 76 for our customer service ad-
dresses.
08/2011
5 6
HSM GmbH + Co. KG
Austrasse 1
88699 Frickingen / Germany
Made in Germany
Modell Spannung
Masch.-Nr. Nennstrom
Seriennummer Leistung
Schnittbreite Baujahr
Primo 1401
english
5 Operation
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
Switching the paper shredder on
• Press rocker switch
Rocker switch locks in place.
Paper shredder is ready for op-
eration (standby).
Feed paper
• Insert the paper to be de-
stroyed. See "Technical data"
for sheet capacity.
Automatic start stop control
starts the cutting system auto-
matically.
Paper is pulled into cutting
system and shredded.
When the paper fee ding
opening is free again, the
cut ting sy stem au to ma tical ly swit ches off
af ter app rox. 3 sec. and returns to standby.
Shredding CDs and credit cards (see
"Proper Use")
WARNING
Depending on the type of material,
splinters could be produced when
shredding CDs. For this reason,
wear protective goggles.
Insert CD/credit card in centre of the feed
opening.
Swit ching paper shredder off
• Tap rocker switch
Switch returns to ze ro po si ti on.
.
.
11