Installing The Media Receiver Vertically - Pioneer PDP-505HDG Manual De Instrucciones

06 Preparation

Installing the Media Receiver vertically

You can use the accompanying stand to install the
Media Receiver vertically.
Installing the Media Receiver vertically
Insert the vertical installation stand into the side of the
Media Receiver.
Right side
Secure the vertical installation stand with
screws.
18
En
Vertical installation stand
screws
You can remove the shock absorbing pads.
Shock absorbing pad
Keep the shock absorbing pads and screws. They are
required when you place the Media Receiver in the
horizontal position.
Plug the screw holes using the caps provided.
Remove the separation sheet.
Align with the
hole and attach.
Screw hole cap
• When you have installed the Media Receiver
vertically, always use the accompanying stand.
If you place the unit directly on the floor the
cooling vents will be blocked which will result in
mechanical failure.