Changing The Password; Resetting The Password; If You Forget The Password - Pioneer PDP-505HDG Manual De Instrucciones

11 Useful Adjustment Settings

Changing the password

Use the following procedure to change the password.
1
Press HOME MENU.
2
Press / to select "Setup", and then press
ENTER.
3
Press / to select "Password", and then press
ENTER.
• The password entry screen appears. Enter the
current 4-digit password using buttons 0 – 9.
4
Press / to select "Change Password", and then
press ENTER.
Change Password
Please Input New Password.
Reconfirm New Password.
5
Enter a 4-digit password to be newly set, using
buttons 0 – 9.
6
Enter the same password that you have entered in
step 5.
• If an unmatching password is entered, the
operation goes back to step 5 for reentry from
the beginning.
• If you fail password change three times by
entering unmatching passwords, the menu is
closed.
7
Press HOME MENU to exit the menu.
• Take a note of the newly set password and keep it
handy.
We suggest you write down your password so you don't forget it.
PDP-505HDG/PDP-435HDG
Your password No.:
62
En

Resetting the password

1
Press HOME MENU.
2
Press / to select "Setup", and then press
ENTER.
3
Press / to select "Password", and then press
ENTER.
• The password entry screen appears. Enter your
4-digit password using buttons 0 – 9.
4
Press / to select "Reset", and then press
ENTER.
Resets password.
5
Press / to select "Yes", and then press ENTER.
6
Press HOME MENU to exit the menu.
• The above procedure will reset the password to the
factory default (1234).

If you forget the password

When the message "Please Input Your Password" is
displayed in step 3 above, press the ENTER button on the
remote control unit and hold it down for 3 seconds or
longer.
The password reverts to "1234".
PLASMA DISPLAY
No
Yes