auna Gaga Manual De Instrucciones página 32

Presets
To store a DAB preset, press and hold PRESET until the display shows the Save preset screen. Select one of the 10
presets to save the currently playing station.
To select a preset, press PRESET briefly, then select one of the listed preset stations. When a preset station is playing,
it shows Pn (P1, P2 etc) at the bottom right of the screen.
P1 to P10 on the remote control are for the use ofpreset station 1-10.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment) information broadcast by
the station giving real-time information such as programme name, track title and contact details. Stereo broadcasts
are indicated with an icon at the top of the screen. To view further information, press INFO.
Each time you press INFO, another set of information is displayed, cycling through DLS text, programme type, ensem-
ble name/frequency, signal strength/error rate, bite rate/codec/channels and today's date.
Settings
• Dynamic range compression (DRC)
If you are listening to music witha high dynamic range in a noisy environment, you may wish to compress the audio
dynamic range. This makes quiet sounds louder, and loud sounds quieter. You can change DRC as off, low or high.
• Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists valid stations first,
alphanumerically, then off-air stations.
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) information about
the station and where broadcast.
To find a station, press SELECT. The frequency display starts to run up as unit scans the FM band. Alternatively, you
can scan up or down by pressing and holding the buttons
NAVIGATE.
5.7.1Preset
To store a FMpreset, press and hold PRESET until the display shows the Save preset screen. Select one of the 10 pre-
sets to save the currently playing station.
To select a preset, press PRESET briefly, then select one of the listed preset stations. When a preset station is playing,
it shows Pn (P1, P2 etc) at the bottom right of the screen.
P1 to P10 on the remote control are for the use ofpreset station1-10.
Now playing information
While the stream is playing, the screen shows its frequency, or if RDS information is available, station name and any
FM
or or tune manually with quick presses or by turning
32