Optional Accessories; Connecting Controllers/Hand Switches; Using The External Control Unit - RK Rose+Krieger LZ S Instrucciones De Montaje

7.7 Optional accessories

Catalogue no.
91900

7.8 Connecting controllers/hand switches

You can connect the following controllers to the drive unit:
•
RK transformer controller (drive unit with electrical wiring "a")
•
RK MultiControl mono (drive unit with electrical wiring "a")
•
RK MultiControl duo (drive unit with electrical wiring "c")
•
RK MultiControl quadro (drive unit with electrical wiring "c")
The drive unit is connected with the external controller.
The controller is not in the drive unit, but in the external controller.

7.9 Using the external control unit

Either a RK transformer controller, RKMultiControl mono or a RKMultiControl duo/quadro con-
troller can be connected to the drive unit. The hand switch is not connected with the drive unit
but with the controller.
To use the controller and the hand switch, read the corresponding installation instructions for the
RK transformer controller, RKMultiControl mono or the RKMultiControl duo/quadro.
Only use the controllers listed in these instructions.
Otherwise, you may damage the drive units or the controllers.
Ensure that nobody is in the vicinity of the drive unit when it is moving.
Therefore, only use the hand switch if you can see the drive units - danger - risk of
accident!
LZ S LZ P
X X
Version
Limit switch
Opener/Closer
max. voltage 250V AC
max. switching current 6A
7. Working life
Illustration
47