Krups 889 Instrucciones De Uso página 15

Breaking off the brewing process
If you wish to break off the brewing process before it is completed, actuate
any one of the following keys:
The process then will be stopped and the spent coffee automatically thrown
out.
Emptying the spent coffee holder and the drawer
The spent coffee holder receives the used coffee-meal and the drawer takes
up any remaining water.
18
19
Preparation of steam
Steam can be used for frothing up milk for cappuccino and also for the
heating of liquids. Since the production of steam requires a higher tempe-
rature than that for the preparation of espresso, the appliance is furnished
20
, , ,
If the "empty spent coffee holder" indicator
glows, raise the drawer slightly and then pull
it out (18). Empty both the spent coffee holder
and the drawer.
The "empty spent coffee holder" indicator will
blink if the drawer is either not inserted or if it is
not correctly located.
Note: Whilst the "empty spent coffee
holder" indicator is glowing or blinking, it is
not possible to prepare espresso or coffee.
Empty the drawer when the drawer-float has
risen to the mark (19).
Note: When you remove the drawer
together with the spent coffee holder from
the appliance before the "coffee grounds
holder" indicator begins to glow, always
empty the spent coffee holder, as the next
indicator otherwise follows too late and the
holder could overflow.
with an additional pre-heating phase for steam.
Press the steam pre-selector
one second (20), whereupon the "steam"
indicator will blink.
When the preheating phase is completed,
the "steam" indicator will glow and you can
commence the production of steam.
or .
key for about
appliance
indicator(s)
15