Krups 889 Instrucciones De Uso página 22

32
Turn the selector knob for steam/hot water to the
The de-scaling process will now continue and the de-scaling solution will
run intermittently into the drawer.
When the "fill water tank" and "empty spent coffee holder" glow, rinse
out the water tank thoroughly. Fill the tank with fresh water (at least 1 litre -
a good half tankful) and return it to the appliance.
Remove the drawer, empty it and return it to the appliance.
The "ON/OFF" and "steam" indicators will blink.
Place a sufficiently large receptacle (at least 300 ml capacity) below the
steam nozzle (32).
Turn the selector knob for steam/hot water to the
The water will be pumped intermittently through the steam nozzle.
When the "empty spent coffee holder" indicator glows, take out and
empty the drawer with the spent coffee holder. Then replace these parts.
The "ON/OFF" and "steam" indicators will blink.
Turn the selector knob for steam/hot water to the
procedure will continue and the water will run intermittently into the
drawer.
When the rinsing operation is completed, the "empty spent coffee holder"
indicator will glow. Empty the drawer and replace it.
The "ON/OFF" and "rinse" indicators will glow.
Place a receptacle beneath the espresso delivery pipe and press the
After the rinsing operation, all indicators will be extinguished.
Remove the drawer with the base grid and spent coffee holder. Clean these
parts with warm water and washing-up liquid. Then dry them thoroughly
and return them to the appliance.
The lime-scale removal programme takes about 25 minutes to complete.
22
Turn the selector knob for steam/hot water to
the position (32).
The de-scaling solution will be pumped
intermittently through the steam nozzle.
When the steam system is de-scaled, the
"empty spent coffee holder" indicator will glow.
Take out and empty the drawer with the spent
coffee holder. Then replace these parts.
The "ON/OFF" and "steam" indicators will
blink.
position.
position (32).
position. The rinsing
key.
appliance
indicator(s)