Controller - Omnitronic CDP-2400 Manual Del Usuario

Rear panel:
4. AC CONNECTION
5. REMOTE CONTROL
Connect the controller via these plugs. Make sure that you connect the player Unit 1 to the controller Unit 1
and the player Unit 2 to the controller Unit 2.
6. AUDIO OUT-SOCKETS
The music-signal of these sockets is analogue. Connect the output to the respective input of your mixer.
7. VOLTAGE SELECTOR
Make sure that the indication corresponds to the available voltage.
8. DIGITAL OUT-SOCKET
The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for
example.

4.3 Controller

In order to design this user manual as structured as possible, only one side of the controller is described.
Frontpanel:
26/71 10602365X17NXS_V_1_0.DOC