Mounting The Loop Handle - Stihl FC 70 Manual De Instrucciones

English
Lawn edging
90°
Starting the engine
N
Start the cut at no less than half
N
throttle and continue cutting at full
throttle.
Hold and guide your edger so that
N
the blade is vertical.
Cut steadily so that the engine is not
N
lugged down – do not apply force.
Cut at no more than a normal
N
walking pace.
Do not push the blade into the
N
ground.
Always walk forwards when cutting,
N
do not pull the unit towards you.
Edge at a steady pace to avoid
N
having to make several passes.
14
1
Use the gunning sight (1) to line up
N
the blade on the edge.

Mounting the Loop Handle

Your new power tool comes with the
loop handle mounted on the drive tube,
but it must be turned and lined up to suit
your requirements.
Adjusting the Loop Handle
1
Loosen the star knob (1).
N
Turn the handle to the vertical
N
position.
FC 70 C