Replacing The Depth Wheel; Replacing The Skirt - Stihl FC 70 Manual De Instrucciones

English

Replacing the Depth Wheel

Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Depth wheel
2
The end of the thread on the
N
screw (1) is caulked to ensure that
the wingnut (2) does not work loose
and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.
26

Replacing the Skirt

Removing the skirt
1
Loosen and remove the screw (1).
N
Remove the washer (2).
1
N
Pull the skirt (3) off the lug (4) and
N
out of the deflector.
Position of skirt
Position the skirt (3) correctly in
N
relation to the depth wheel (5): The
wheel is on the left – the skirt must
project to the right.
3
2
4
5
3
Fitting the skirt
3
4
Push the skirt (3) into the slot in the
N
deflector until it can be engaged on
the lug (4).
Fit the washer on the screw.
N
Insert the screw and tighten it down
N
firmly.
FC 70 C